Skeptick is an all-purpose DSL for building and running ImageMagick commands.

Skeptick: Better ImageMagick for Ruby

Skeptick is an all-purpose DSL for building and running ImageMagick commands. It helps you build any transformations, from trivial resizes to complex mask algorithms and free drawing. In a nutshell, Skeptick is nothing more than a string manipulator and a process spawner. That's all it's meant to be. However, with Skeptick you get quite a few advantages over using plain shell-out or other libraries.

What you get

• Clean Ruby syntax to build ImageMagick commands
• Composable Image objects
• ImageMagick's STDERR output revealed in a Ruby exception
• Ability to save intermediate images for debugging
• Minimal memory consumption on shell-outs thanks to posix-spawn
• Emphasis on performing the whole transformation in a single command

Installation

Add this line to your application's Gemfile:

gem 'skeptick'

And then execute:

$ bundle

Or install it yourself as:

$ gem install skeptick

Usage

To use Skeptick, you simply require it and include the module into your class.

require 'skeptick'

class MyClass
  include Skeptick

  def convert_some_image
    cmd = convert(to: 'result.png') do
      # ...
    end

    cmd.run
  end
end

The cmd object seen in above example can be inspected to see the exact command that Skeptick will run. Simply use cmd.inspect or cmd.to_s. Skeptick never runs anything until you call run (except for one very special case), so you can inspect commands all you want before executing them.

If you don't want to require all of Skeptick, you can just require the core, and and select any specific sugar you want.

require 'skeptick/core'
require 'skeptick/sugar/resized_image'
require 'skeptick/sugar/compose'

See the lib/skeptick/sugar dir for all the goodies.

In Rails Skeptick will automatically use Rails.logger and Rails.root as cd_path. You can also configure your own.

Skeptick.logger  = MyLogger.new
Skeptick.cd_path = '/some/dir'

You can enable debug_mode to display every executed command in the log.

Skeptick.debug_mode = true

Security Note

Never insert any user input into any of Skeptick's commands. This should be obvious. Skeptick executes strings in your shell.

DSL

Take a look at [logo.rb](logo.rb) to see thow this logo was generated.

A lot is going on in the above script, no worries, it's just a showcase. I bet the first thing you noticed is a shitstorm of little method names like canvas, font, write, draw, etc. Well, they are all sugar. We will cover sugar below.

There are actually only 2 useful methods in all of Skeptick: convert and set.

Convert

convert can be used both standalone and inside another convert. You could say this.

command = convert('image1.png', to: 'image2.png') do
  set :resize, '200x200'
end

# OUTPUT:
# convert image1.png -resize 200x200 image2.png

Or you could put it inside, and it will become a parenthesized subcommand.

command = convert('image1.png', to: 'image2.png') do
  convert do
    set '+clone'           # pull in image1 into parentheses
    set :resize, '100x100' # resize image1's clone in memory
  end

  set '-compose', 'over'
  set '-composite'
end

# OUTPUT:
# convert image1.png ( +clone -resize 100x100 )
#   -compose over -composite image2.png

If you love parentheses a lot, you could nest convert infinitely. However, ImageMagick's clone, delete, and swap are your friends, learn them to cure parenthethitis.

Oh, speaking of nesting — we can reuse that whole command inside another command by passing it to convert in place of an image filepath.

new_command = convert(command, to: 'whatever.png') do
  set '-resize', '300x300'
end

# OUTPUT:
# convert
#   ( image1.png ( +clone -resize 100x100 ) -compose over -composite )
#   -resize 300x300 whatever.png

See what I did there? The command from previous snippet is passed into convert. If you have a convert object in a variable, you can use it inside another convert object down the line. Nesting possibilities are endless.

The same snippet could also be written like this.

new_command = convert(to: 'whatever.png') do
  image command
  set :resize, '300x300'
end

2 differences: 1 - instead of passing in command as argument we declare it inside the block. 2 - resize is a symbol. Any symbol passed into set automatically becomes a string with dash in front of it. Speaking of set.

Set

set adds stuff to your command. You can give it any various arguments, it doesn't care.

# Works the same way:
set '-resize', '100x100'
set :resize, '100x100'

# bad, won't work
set '-resize 100x100'

Watch out for the fact that it shell-escapes every argument, so if you write set '-resize foo', you will get an error, since the space will be escaped, and shell would treat that whole string as single word.`

In addition to set there are also prepend and append to put stuff at the beginning or end of a command, but they are rarely useful, and mostly for implementing your own sugar.

Sugar

Skeptick comes with a bunch of sugar. When you require Skeptick, you can simply require everything. This includes all the sugar functionality.

require 'skeptick'

However, you can require just the core stuff described above, and select any sugar you want.

require 'skeptick/core'
require 'skeptick/sugar/compose'

Compose Sugar

Compose is sugar that adds compose shortcut to Skeptick's DSL.

command = compose(:multiply, 'a.png', 'b.png', to: 'out.png') do
  set :resize, '200x200'
end

# OUTPUT:
# convert a.png b.png -compose multiply -resize 200x200 -composite out.png

It takes the blending type as the first argument, and injects some extra stuff into the resulting command.

As with convert, you don't have to list your images as method arguments. Instead you could declare them inside the block using the image method. The following command does the same thing.

command = compose(:multiply, to: 'out.png') do
  image 'a.png'
  convert 'b.png'
  set :resize, '200x200'
end

Note: image is alias of convert.

Since most of Skeptick's power comes from the ability to infinitely nest things, here's an example involving a nested compose.

command = convert('image1.png', to: 'result.png') do
  compose(:multiply) do
    image 'image2.png[200x200]'

    convert 'image3.png' do
      set :unsharp, '0x5'
    end
  end
end

# OUTPUT:
# convert
#   image1.png image2.png[200x200] ( image3.png -unsharp 0x5 ) -compose
#   multiply -composite result.png"

Notice how we nest compose inside of convert, and then convert inside of compose.

Compose Operators

This is more of a gimmick than a real feature, but you can use math operators like +, -, *, /, &, | to compose images. These are all based on compose method. Here's a multiply example.

image1 = image('foo.png')
image2 = image('bar.png')
result = convert(image1 * image2, to: 'baz.png')

# OUTPUT:
# convert foo.png bar.png -compose multiply -composite baz.png

As you can see, this is equivalent of simply using compose.

# Same thing
result = compose(:multiply, 'foo.png', 'bar.png', to: 'baz.png')

Check out [lib/skeptick/sugar/compose.rb](lib/skeptick/sugar/compose.rb) for what these operators do.

clone, delete, swap

Skeptick provides methods clone, delete, and swap to manipulate declared images in a sequence, just like in ImageMagick CLI.

command = compose(:over, 'image1.png', to: 'result.png') do
  # You could think of image sequence as a ruby array. Here's what it would
  # look like right now.
  # [ 'image1.png' ]

  compose(:multiply) do
    image 'mask.png' # loading another image for this operation
    clone(0)         # cloning image1.png from outside "into parentheses"
  end

  # Sequence at this point:
  # [ 'image1.png', 'result of compose(:multiply)' ]

  delete(0) # deleting image1.png from the sequence and from memory

  # Sequence at this point:
  # [ 'result of compose(:multiply)' ]

  # At this point the only image loaded in memory is the one produced by the
  # compose(:multiply) command above. Let's load another one.

  image 'image2.png'

  # Sequence at this point:
  # [ 'result of compose(:multiply)', 'image2.png' ]

  # Now we have two images in the sequence. We can swap them in case we need
  # to change their order.

  swap

  # Sequence at this point:
  # [ 'image2.png', 'result of compose(:multiply)' ]

  # Now image2.png is first in the sequence, and the output of
  # compose(:multiply) is second. Since our outermost command is compose(:over),
  # at this point these 2 images will be composed over each other, and the
  # result written to result.png.
end

# OUTPUT
# convert
#  image1.png ( mask.png -clone 0 -compose multiply -composite )
#  -delete 0 image2.png +swap -compose over -composite result.png

You can use clone and delete to refer to multiple images at once by passing mutliple indexes as arguments, like clone(0,1,2) or delete(0,1). Ranges are also accepted. Without any arguments clone and delete are translated to ImageMagick's +clone and +delete. They then refer to the last image in the sequence. Same with swap - you can provide two indexes in arguments like swap(1,3) to swap any 2 images in the sequence, or without arguments it'll act as +swap - which swaps last two images.

Write

Sometimes you might want to take a look at an intermediate image that's being generated inside parentheses, nested somewhere in your command. You can do so with the help of write '/path/to/img.png', which is defined in skeptick/sugar/write.rb.

command = convert(to: 'result.png') do
  compose(:multiply, 'a.png', 'b.png') do
    write '~/Desktop/debug.png'
  end

  set :resize, '200x200'
end

In this case the result of inner compose command will be saved to desktop without affecting anything else. This is a feature that already exists in ImageMagick, as you can see for yourself from generated command:

convert
  ( a.png b.png -compose multiply -composite -write ~/Desktop/debug.png )
  -resize 200x200 result.png

Documentation is to be continued...

Contributing

1. Fork it
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Add some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request